Technical information

ADC Telecommunications, Inc.
564 C
HAPTER 20: MANAGING CABLE MODEMS
Monitoring Cable Modem Services Information
The function of CMTS Cable Modems Services is to monitor the cable
modem (CM) status and QoS Profile that have been assigned to DOCSIS 1.0
cable modems. These services are assigned when the cable modems are
provisioned. For more information about provisioning cable modems, refer
to the FastFlow Broadband Provisioning Manager Guide, or the
documentation for your external provisioning manager.
Cable modems, within the CMTS Cable Modems Services window, are
identified by their Service ID (SID). From this window, the MAC address and
cable modem status information can be displayed for a specific SID. The
cable modem QoS Profile information can also be displayed for a specific
SID.
Before You Begin
Before you monitor services, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > CMTS > Interfaces.
2. Click Cable Modems tab.
3. Click Services tab.
4. Click Summary tab (Figure 20-5, “Cable Modem Services Summary
Window”).
5. Select the row that includes the SID that you wish to display.
6. Click Refresh to update the information.
NOTE: Within Services, you may view a list of the provisioned DOCSIS 1.0
and 1.1 cable modems. However, you may only monitor CM Status and QoS
Profiles for DOCSIS 1.0 cable modems. To monitor services for DOCSIS 1.1
cable modems, refer to section “Monitoring Quality of Service” on page 587.