Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Managing Status Summary 561
Modifying an Upstream Channel
Modifying an upstream channel switches a cable modem to another
Upstream Channel ID. A modem can only be switched to an upstream
channel that is Up. To change the Upstream Channel ID follow this
procedure:
1. In the Cable Modems window, click the Status Summary tab.
2. Select the row that includes the MAC Address of the cable modem you
wish to change (Figure 20-2, “Status Summary Window”).
3. Click the Modify Upstream Channel button. The CM Status Modify
Upstream Channel window appears.
4. From the menu, choose another upstream channel ID.
5. Choose Ok to apply the changes or click Cancel to exit without saving.
6. Click Refresh to update the information.
What You See
Figure 20-3 CM Status Modify Upstream Channel Window