Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Cable Modem (CM) Certificates 549
Configuring Cable Modem (CM) Certificates
Cable modem (CM) Certificates are assigned to provisioned cable modems.
A CM Certificate is required when the cable modem requests authorization.
You can add, modify, or delete CM Certificates that the CMTS acquired. To
configure CM Certificates, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > CMTS > BPI Certificate
2. Click the CM Certificates tab.
3. Click the Summary tab.
4. Click Refresh to update the window.
Figure 19-6 CM Certificates Summary window.
Adding a CM Certificate
To add a CM Certificate, follow this procedure:
1. From the Summary window, click Add. The Details window appears.
2. Enter values for the parameters. Refer to Table 19-2.
3. Click the Import button to import a certification file from the server. The
Select a Certificate File window appears (Figure 19-3, “Select a
Manufacturer/CA Certificate File Window”).