Technical information

ADC Telecommunications, Inc.
542 C
HAPTER 19: CONFIGURING BPI PLUS CERTIFICATES
Access Privileges
Prerequisites
BPI+ is the final stage in initializing cable modems for communication with
the CMTS. Before you can configure BPI+, the cable modem must have been
initialized as follows:
■ Provisioned with BPI+ enabled (Refer to the FastFlow Broadband
Provisioning Manager GUI-based Administration Guide, or the
documentation of your external provisioning manager);
■ Registered with the CMTS;
■ Configured for BPI+ Privacy Authorization and Privacy TEK;
■ Configured for Privacy Multicast with IGMP protocol.