Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Modulation Profiles 539
Deleting a Profile
A profile can be deleted only if it is not being referred by any of the upstream
channels. To delete a modulation profile, follow this procedure:
1. In the Modulation Profiles window, select the row that includes the Profile
Index number you wish to change.
2. Click Delete. The profile immediately deletes from the CMTS application
module. There is no Reset option. If you wish to retrieve the deleted
profile, you must reboot the CMTS module, using the Reset button on
the module.
■ Note: You can only retrieve a profile if you did not Save after you
deleted the profile.
Copying a Modulation Profile
The Cuda 12000 allows you to copy a module profile to use as a template.
All existing profiles may be copied, including the default profiles. The new
profile, which is created by the template, may be modified as necessary for
your environment.
To copy existing modulation profiles, follow this procedure:
1. In the Modulation Profiles window, select the row that includes the Profile
you wish to copy.
2. Click Copy. The Copy Profile Index "n" window appears, where "n"
represents the index number you are copying.
3. Update information as necessary. Refer to Table 18-23.
4. Click Ok to commit the information or click Cancel to exit without
saving.