Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Modulation Profiles 535
Configuring Modulation Profiles
Modulation profiles contain the profile properties of the CMTS upstream
data stream channels. The CMTS supports two profiles for the four upstream
channels. Each profile consists of a burst description for the Interval Usage
Codes listed below.
Two modulation profiles are configured at the ADC plant and shipped with
the Cuda 12000. For the purpose of module profile security, the default
profiles may not be modified or deleted.
NOTE: Profiles affect the physical layer. Changes to profile properties
affect the performance and function of the CMTS. It is recommended
that an expert-level user perform Modulation Profile configuration.
Before You Begin
Before you configure modulation profiles, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > CMTS > Modulation Profiles.
The Modulation Profiles window appears. Refer to Table 18-22 for table
information.
What You See
Figure 18-23 Modulation Profiles Window
Parameter Descriptions
This table provides a description of the Modulation Profiles window.