Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Advanced CMTS Functions 529
To configure CM Offline Control, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > Interfaces.
2. Click the Interfaces tab. Select the interface that you want to configure.
3. Click the Advanced tab.
4. Click the CM Offline Control tab. The CM Offline Control window
appears.
5. Enter values for the parameters. Refer to
6. Click Apply to commit the values; or, click Reset to return to the default
values.
What You See
Figure 18-20 CM Offline Control Window
Parameter Descriptions
This table describes the parameters that you configure for CM offline
control:
Table 18-19 CM Offline Control Window Parameters
Parameter Description
CM Offline Timer (days) Specify the duration of time, in days, that you
want the CMTS to track offline cable modems. By
default, offline time is set to 30 days. Acceptable
values are 0 to 365 days.