Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Advanced CMTS Functions 523
Modifying a Privacy IP Multicast Entry
You may modify IP multicast map entries. To modify entries, follow this
procedure:
1. In the BPI Parameters window, click the Privacy IP Multicast tab. The
Privacy IP Multicast window appears.
2. Click the Summary tab. Select the row that includes the entry that you
want to change.
3. Click Modify. The Details window appears.
4. Modify the required information. Refer to Table 18-16.
5. Click Ok to commit the changes or click Cancel to exit without changes.
Encrypt. Alg Specify one of the following encryption algorithms:
■ none - no encryption.
■ des56cbcMode - a 56-bit DES packet data encryption.
■ des40cbcMode - a 40-bit DES packet data encryption.
Authent. Alg Specify the authentication algorithm. At this time, only a
value of none is supported.
Requests Read only. The number of times the CMTS has received an
SA Map Request message for this IP.
Replies Read only. The number of times the CMTS has transmitted
an SA Map Reply message for this IP
Rejects Read only. The number of times the CMTS has transmitted
an SA Map Reject message for this IP.
Reject error code The enumerated description of the Error-Code in the most
recent SA Map. The Reject message sent in response to a
SA Map Request for this IP. It has value unknown(2) if the
last Error-Code value was 0, and none(1) if no SA MAP
Reject message has been received since reboot
Reject Error String The Display-String in the most recent SA Map Reject
message sent in response to an SA Map Request for this IP.
It is a zero length string if no SA Map Reject message has
been received since reboot.
Parameter Description