Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Upstream Channels 509
Modifying a Policy
To modify a Frequency Hopping policy, follow this procedure:
1. In the Spectrum Group window, select the entry you wish to modify.
2. Click Modify. The Modify Frequency Hopping Rule window displays.
3. Modify the required parameters. Refer to Table 18-23.
4. Click Ok to commit the changes or click Cancel to exit without saving.
Deleting a Policy
To delete a Frequency Hopping policy, follow this procedure:
1. In the Spectrum Group window, select the entry that includes the policy
you want to delete.
2. Click Delete. A window displays to confirm
3. Click Yes to delete the policy or click Cancel to exit without deleting.
Resetting a Policy
You may change the specific configuration of a current rule to the default
configuration.
To use the default configuration for a current rule, follow this procedure:
1. In the Spectrum Group window, select the entry you wish to change.
2. Click the Reset Current Rule button. Note that a confirmation window
does not display, and the configuration is changed immediately to the
default values.
Freq Hopping Policy
Threshold Interval
Threshold interval, in seconds, for this frequency
hopping policy entry. By default, threshold interval is
set to 10.
Freq Hopping Profile
Number
Modulation profile number to be used when error
threshold is reached in configured threshold interval
time.
Center Frequency (MHz) Center frequency value to be used when error
threshold is reached in configured threshold interval
time. By default, center frequency is set to 5 Mhz.
Parameter Description