Technical information

ADC Telecommunications, Inc.
508 C
HAPTER 18: CONFIGURING AND MONITORING CABLE MODEM TERMINATION SYSTEMS
Adding a Policy
For each upstream channel, you may configure up to five policies.
To add a Frequency Hopping policy, follow this procedures:
5. In the Spectrum Group window, click Add. The Add Frequency Hopping
Rule window appears.
6. Enter values for the parameters. Refer to Table 18-23.
7. Click Ok to commit the changes or click Cancel to exit without saving.
8. Click Refresh to update the window.
Figure 18-11 Add Frequency Hopping Rule Window
Parameter Descriptions
This table provides a description of the Add Frequency Hopping Rule window
parameters
Table 18-11 Frequency Hopping Configuration Parameters.
Parameter Description
Freq Hopping Policy
Index
Read only. The rule number assigned to this policy.
Freq Hopping Policy Error
Threshold
Percentage error threshold for this frequency
hopping policy entry. By default, error threshold is
set to 1.