Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Upstream Channels 497
Configuring Upstream Channels
Upstream channels transfer data from the cable modems to the headend.
Data transfer is accomplished in bursts. The Cuda 12000 supports four
upstream channels per CMTS module. You must configure each channel
independently from the other.
Before You Begin
Before you configure upstream channels, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > CMTS > Interfaces.
2. Click the Interfaces tab. The Interfaces window appears.
3. Select the CMTS interface that you wish to configure.
4. Click the Upstreams tab. The Upstreams window appears.
Configuring Upstream Channels Parameters
To configure the upstream channel parameters, follow this procedure:
1. In the Upstreams window, Click the Parameters tab.
2. Select the Channel Id that you want to configure, from the Selected
Upstream Channel Id menu.
3. Enter values for the parameters. Refer to Table 18-7.
4. Click Reset to commit the changes or click Reset to return to the
previous values.