Technical information

ADC Telecommunications, Inc.
470 C
HAPTER 17: IP MULTICAST
Parameter Description
This table provides a description of the IGMP Group window parameters:
Adding IGMP Groups
You can add an IGMP group manually or the group can be learned by
receiving IGMP reports over the network. There are no predefined multicast
groups.
To add an IGMP group, follow these steps:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > Multicast > IGMP.
2. Click the Interface tab.
3. Click the Summary tab.
4. In the Summary window, select the interface for which you want to add
an IGMP group and click the Group tab. The Group window appears.
5. Click Add. The Add IGMP Group window appears.
Table 17-2 Group Window Parameters
Parameter Description
Group Address The IP address of the IGMP group.
Up Time Time elapsed in hours, minutes, and seconds since the
creation of the entry.
Expires Minimum amount of time remaining before this entry is aged
out. If the value is zero, the entry does not time out.
Last Reporter Source IP address for the last membership report received for
this group IP address. If no report is received, the value is
0.0.0.0.
Status Status of the entry including:
Learned Group is learned by receiving an IGMP report over the
network
Self Group is locally joined or joined from an application, for
example, RIP or OSPF
.
Proxy Group is being proxied on this interface.