Technical information

ADC Telecommunications, Inc.
468 C
HAPTER 17: IP MULTICAST
Configuring IGMP Groups
For each interface, you can view, add, or delete an IGMP group. Follow the
procedures in this section to configure IGMP groups.
Before You Begin
Before you configure IGMP groups, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > Multicast > IGMP.
2. Click the Interface tab.
3. Click the Summary tab. The interface summary table appears.
4. Click Refresh to update the window.
Viewing IGMP Groups
To view IGMP groups for each interface, follow this procedure:
1. In the Summary window, select the interface you wish to view.
2. Click the Group tab. The Group window appears.
3. Click Refresh to update the information.