Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Defining BOOTP Polices 453
Defining BOOTP Polices
BOOTP Policies determine the BOOTP servers to which a CMTS interface
forwards BOOTP requests from attached cable modems and diskless
workstations.
To define BOOTP policies, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > DHCP.
2. Click the Summary tab.
1. In the DHCP Summary window (Figure 16-1, “DHCP Relay Options
Window”), select the row that includes the interface on which you want
to configure BOOTP policies.
1. Click the BOOTP Policy tab.
2. Click the Summary tab.
3. Click Add. The Details window displays. Refer to Figure 16-8.
4. Enter values for these parameters. Refer to Table 16-4.
5. Click Apply to commit the information.
6. Click Refresh to update the information.
Figure 16-7 BOOTP Policy Summary Window