Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring DHCP Authority 445
5. Click the Add button. The Add DHCP Authority Range window appears.
6. Enter values for these parameters:
■ Starting IP Address — Starting IP address for the DHCP Authority
range.
■ Ending IP Address — Ending IP address for the DHCP Authority range.
7. Click Apply to save the entries or click Cancel to exit without saving.
Figure 16-5 Add DHCP Authority Range Window
Modifying DHCP Authority Ranges
To modify DHCP Authority ranges, follow this procedure:
1. In the Summary window, select the row that includes the interface on
which you want to configure DHCP Authority.
2. Click the DHCP Authority tab.
3. Click Modify.
4. Enter changes to the information.
5. Click Apply to save the changes or click Cancel to exit without saving.