Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring DHCP Authority 443
■ If there is no DHCP Authority range, the entry is simply added to the
ARP cache and labelled as type “
Dynamic” when the ARP mapping is
learned.
This feature is termed DHCP Authority because those tagged as being
assigned via DHCP take precedence over dynamically assigned (non-DHCP
tagged) ARP entries.
Enabling and Disabling DHCP Authority
To enable or disable DHCP authority on an interface, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > DHCP.
2. Click the Summary tab.
3. Click Refresh to update the information.
4. In the Summary window, select the row that includes the interface that
you wish to enable or disable DHCP authority.
5. Click the DHCP Authority tab.
6. Clear or select the DHCP Authority Enabled check box. Selecting the
check box enables DHCP Authority. Clearing the check box disables DHCP
Authority.