Technical information

ADC Telecommunications, Inc.
438 C
HAPTER 16: CONFIGURING DHCP RELAY
8. To assign the gateway for the CPE and IP LAN hosts, select the IP address
from the Gateway Summary list. Go to the Host Gateway Address
section and click Set Gateway. This automatically adds the address to
the Host Gateway field. The Host Gateway picks the subnet that the
DHCP relay requests from the DHCP server for the host.
9. To assign the gateway for the cable modem hosts, select the IP address
from the Gateway Summary list. Go to the CM Gateway Address
section and click Set Gateway. This automatically adds the address to
the CM Gateway field. The CM Gateway is used to pick the subnet that
the DHCP relay requests from the DHCP server for a cable modem.
10. To assign the gateway for the MTA device hosts, select the IP address
from the Gateway Summary list. Go to the MTA Gateway Address
section and click Set Gateway. This automatically adds the address to
the MTA Gateway field. The CM Gateway is used to pick the subnet that
the DHCP relay requests from the DHCP server for a cable modem.
11. To clear a gateway address, go to the gateway address that you want to
clear and choose Clear Gateway.
12. After you complete configuration, choose Apply to save the
configuration.