Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
About DHCP Relay 435
Request is received and it is from the MTA device, then the MTA
Gateway Address is used by the DHCP Relay.
■ Enabling or disabling agent options.
Refer to
RFC3046 for a description of DHCP Relay options.
Before You Begin
Before you begin to configure DHCP Relay, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > DHCP.
2. Click the Summary tab.
3. Click Refresh to update the information.
What You See
Figure 16-1 DHCP Summary Window
Parameter Descriptions
This table provides a description of the DHCP Summary window
Table 16-1 DHCP Summary Parameters.
Parameter Description
Chassis Indicates the number identifying the chassis in the network.