Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Assigning Bridged Interfaces to Gateways 427
Assigning Bridged Interfaces to Gateways
Gateway Addresses are used by the DHCP Relay to request a specific IP
address for the host, cable modem, and MTA devices. Keep in mind that, for
DHCP Relay purposes, Host refers to CPE and IP LAN Host.
For more information about DHCP Relay, and Gateway Addresses, refer to
Chapter 16, “Configuring DHCP Relay”.
To assign bridged interfaces to host, cable modem and MTA gateways,
follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > DHCP.
2. In the DHCP Summary window, select the row that includes the bridged
interface to which you want to assign a gateway address.
3. Click the DHCP Relay tab.
4. Click the DHCP Relay Options tab. Enable the DHCP Relay Enabled and
DHCP Agent Options by selecting the option.
5. To assign a host, CM or MTA gateway for the selected interface, choose
the following options:
a To assign a host gateway, from the Gateway Summary window select the
gateway address that you want to assign to the host. Go to the Host
Gateway Address field and choose Set Gateway.
b To assign a CM gateway, from the Gateway Summary window select the
gateway address that you want to assign to the cable modem. Go to the
CM Gateway Address field and choose Set Gateway.
c To assign a MTA gateway, from the Gateway Summary window select the
gateway address that you want to assign to the cable modem. Go to the
MTA Gateway Address field and choose Set Gateway.