Technical information

ADC Telecommunications, Inc.
424 C
HAPTER 15: NETWORK-LAYER BRIDGING
5. Click Add. The Add IP Interface window appears (Figure 12-5, “Add IP
Interface Window”).
6. Enter the IP Address, Network Mask, and Priority that you want to use for
the bridge group. Refer to Table 15-5.
7. Click Ok to commit the entry or Cancel to exit without saving.
Status Indicates whether the interface is up (in service) or down (not
in service).
IP Addr IP address for this interface
Net Mask Network mask for this interface.
Interface Priority Specifies the priority of the source IP address for sending
packets originating at the interface.
Reasm Size Largest IP datagram that the router can reassemble from
incoming IP fragmented datagrams received on the interface.
Parameter Description