Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Adding Interfaces to Bridge Groups 421
What You See
This figure shows an example of the Bridge Group Interfaces window.
Figure 15-3 Bridge Group Interfaces Window
Parameters
This table describes the parameters of the Bridge Group Interfaces window.
Table 15-3 Bridge Group Interfaces Parameters
Parameter Description
Chassis ID Specifies the new chassis ID for this Cuda 12000 in the
network. The Cuda 12000 uses a multi-range
numbering system. Acceptable chassis ID values are 1
to 128, or 255. The default is one.
Slot This indicates the slot in which the Management
module is installed.
Interface Interface ID of the Route Server module.