Technical information

ADC Telecommunications, Inc.
418 C
HAPTER 15: NETWORK-LAYER BRIDGING
Creating Bridge Groups
You must first create a network-layer bridge group before you can configure
it.
To create a bridge group, follow this procedure:
1. In the Network Layer Bridging Summary window, click Add. The Add
Bridge Group window appears.
2. Enter a name for the bridge group. Refer to Table 15-2. Click Ok to
commit the entry or Cancel to exit without saving.
What You See
Figure 15-2 Add Bridge Group Window
Table 15-2 Add Bridge Group Window Parameters
Deleting Bridge Groups
To delete a bridge group, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > Network Layer Bridging.
2. In the Network Layer Bridging Summary window, select the Bridge Group
you wish to delete.
3. Click Delete. A confirmation window appears.
Parameter Description
Bridge ID Number assigned to network layer bridge group.
Bridge Name The name of this network layer bridge group.