Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Enabling or Disabling IP Filter Aging 411
Parameter Descriptions
This table provides a description of the Filter Aging Configuration window
Table 14-4 Filter Aging Configuration Parameters.
Modifying IP Filter Aging
To modify the IP Filter Aging for an interface follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Packet Filtering.
2. Click the Filter Aging tab.
3. Click the Summary tab. The Filter Aging Summary window appears
(Figure 14-8, “Filter Aging Summary Window”).
4. Select the row that includes the interface you want to modify.
5. Click Modify. The Configuration window appears (Figure 14-9,“Filter
Aging Configuration Window”).
6. Modify the required parameters. Refer to Table 14-4.
7. Click Apply to commit the changes or click Reset to reset the
parameters.
Parameter Description
Filter Age In Select or deselect the Filter Age In check box to enable or
disable IP Filter Age In
Filter Age In
Rate
Indicates the flow aging rate, in flows/second, when Flow
Age In is enabled. The valid range is 400 - 4096
flows/second. The default is 4096, which means the entire
flow table can be examined in 16 seconds.
Filter Age Out Select or deselect the check box to enable or disable IP FIlter
Age In.
Filter Age
Out Rate
Indicates the flow aging rate, in flow/second, when Flow Age
Out is enabled. The valid range is 400 - 4096 flows/second.
The default is 4096, which means the entire flow table can
be examined in 16 seconds.