Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Enabling or Disabling IP Filter Aging 409
Enabling or Disabling IP Filter Aging
When you enable IP Filter Aging on a particular interface, the filter flow table
is periodically examined for activity at a computed rate. If a flow shows no
activity during an examination period, the flow is removed from the table.
To enable or disable IP Filter Aging, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Packet Filtering.
2. Click the Filter Aging tab. The Filter Aging Summary window appears
(Figure 14-8, “Filter Aging Summary Window”).
3. Select the row that includes the interface for which you want to enable or
disable IP Filtering. The Configuration window appears
(Figure 14-9,“Filter Aging Configuration Window”).
4. Enter values for the Filter Age In and Filter Age Out parameters. Refer to
Table 14-4.
5. Click Apply to commit the changes or Click Reset to reset the
parameters.
Figure 14-8 Filter Aging Summary Window
Parameter Descriptions
This table provides a description of the Filter Aging Summary window.