Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Applying Access Lists to Interfaces 407
Figure 14-6 Select Priority Window
Changing the Priority
Just as the rule number determines the sequence of rule examination within
an access list, priority specifies the order of access list examination within the
access class that you apply to an inbound or outbound interface.
Figure 14-7 shows a logical representation of an access class for an inbound
or outbound interface.
Figure 14-7 Access Class
To change the priority of an access class, follow this procedures:
1. In the Incoming and/or Outgoing Access Classes window, select the list
for which you wish to change the priority in the Incoming Access Classes
or Outgoing Access Classes window.
2. Click Change Priority. The Select Priority window appears.
Access List 1 / Priority 1
Access Class/Inbound
Access List 2 / Priority 2
Access List 3 / Priority 3
Access List 4 / Priority 4
Access List 5 / Priority 5
Access List 1 / Priority 1
Access List 2 / Priority 2
Access List 3 / Priority 3
Access List 4 / Priority 4
Access List 5 / Priority 5
Access Class/Outbound