Technical information

ADC Telecommunications, Inc.
404 C
HAPTER 14: IP PACKET FILTERING
Applying Access Lists to Interfaces
After you create an access list, you can apply it to one or more CMTS
interface to filter traffic. Filters can be applied to either outbound or inbound
interfaces or both.
Filtering is enabled automatically when you apply an access list to an
interface. When filtering is enabled with no access lists applied to the
interface, the interface permits all traffic to pass.
Before You Begin
Before you configure Access Lists, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Packet Filtering.
2. Click the Interface Configuration tab. The Interface Configuration
window appears.
3. Select an interface.
4. Click the Access Classes tab. The Access Classes window appears.
5. Click Refresh to update the information.