Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Access Lists 399
Figure 14-2 shows a logical representation of an access list:
Figure 14-2 Access List
You can use access lists to filter these protocols:
■ Internet Protocol (IP)
■ Transmission Control Protocol (TCP)
■ User Datagram Protocol (UDP)
When masking network addresses, 0 indicates “care” bits; 1 indicates “don’t
care.” For example, a class C network would be masked as 0.0.0.255.
Before You Begin
Before you configure Access Lists, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Packet Filtering.
2. Click the Access Lists tab. The Access List window appears.
3. Navigate through the Access Lists tab structure to Filtering Rules >
Summary. The Summary window appears.
Rule 1 match / action
Rule 2 match / action
Rule 3 match / action
Rule 2 match / action
Access List
Implicit Deny