Technical information

ADC Telecommunications, Inc.
390 C
HAPTER 13: CREATING ROUTE FILTERS
What You See
Figure 13-12 Export Filters ACL Window
Creating RIP and OSPF Export Filter ACLs
This section describes how to create and add RIP and OSPF Export ACLs. The
ACL configuration allows you to create an association between an ACE and
ACL.
To create a RIP and OSPF Export ACL follow this procedure:
1. In the Export Filters window, click the ACE tab to view the list of ACEs.
2. Click the ACL tab.
3. Click Add. The Add template list for filter window appears.
4. To select an ACE to associate with the ACL, select the ACE that you want
to use from the Pool of all templates section
5. Using the “>>” toggle button, move the ACE to the Templates for filter
section. You may choose more than one ACE for an ACL.
6. If you associated multiple ACEs and want to change the filtering order,
from the Templates for filter section, select the ACE. Using the Up and
Down buttons click Up to move the ACE up one level, or click Down to
move the ACE down one level.
7. Click Ok to commit the changes or click Cancel to exit without saving.