Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring RIP and OSPF Export ACLs 389
Configuring RIP and OSPF Export ACLs
An ACL is a sequential grouping of ACEs, which contain the filtering criteria.
An incoming or outgoing route is compared against all ACEs that comprise
the ACL. Whenever a route match is found, the system takes the action that
is defined in the ACE.
Configuration involves these functions:
■ Creating an ACL by selecting an ACE from a pool and adding it to the
ACL.
■ Maneuvering ACEs to and from the ACLs.
■ Choosing which ACL is to be the Active ACL. ACLs must be activated in
order for the Cuda 12000 to recognize it during the match process.
Export ACLs control which routes are advertised to other routers. RIP and
OSPF use route filters to control the flow of routes to and from routing
tables. You may use route filters to increase security, conserve routing table
space, or adjust route cost.
Before You Begin
Before you begin to create export ACLs, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Routing.
2. You can configure RIP route filters or OSPF route filters:
a To configure the RIP route filters, click the RIP Global tab.
b To configure the OSPF route filters, click the OSPF Global tab.
3. Click the Export Filters tab.
4. Click the ACL tab.