Technical information

ADC Telecommunications, Inc.
386 C
HAPTER 13: CREATING ROUTE FILTERS
Tag Route tag to match against the value placed in the route tag
field of the OSPF packet by the sending router.
Exact — If the Tag field is specified, then enabling Exact
indicates that the match is intended to match all routes with
an exact match on the tag field.
Exclude — If the Tag field is specified, then enabling Exclude
indicates that the match is intended to match all routes that
do not match on the tag field.
Route
Address
Route Address key to match against routes in the routing
database.
Route Mask Network mask to match against incoming routes.
Protocol The options are:
NONE Indicates that the route is not being used as part of the match
criteria.
LOCAL Route for a directly attached network.
REMOTE Static route for a remotely attached network.
SPECIAL Default route.
RIP Route learned through RIP.
EGP Route learned through the External Gateway Protocol. The
Cuda 12000 does not support EGP, in this release.
BGP_EXT Route learned through an external BGP router.The Cuda
12000 does not support BGP, in this release.
BGP_INT The Cuda 12000 does not support BGP internal router, in this
release.
Action Action that you want the system to take when matching
outgoing OSPF routes. The options are:
Specific 1 An OSPF-specific protocol field. Enter the next hop IP address.
Specific 2 An OSPF-specific protocol field. Enter the network IP address.
Action Action that you want the system to take when matching
routes are found. The options are:
Export Announce the route to be distributed
Block Block the route from being distributed
Override The options are:
Metric Use this value to override the metric value from the routing
database entry for this route.
Parameter Description