Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring RIP and OSPF Export ACEs 383
Modifying RIP Export ACEs
Modifying a RIP Import ACE involves removing the ACE from an ACL within
the ACL configuration window, and modifying the ACE within the ACE
configuration window.
To modify a RIP Export ACE, follow these steps:
1. In the Export Filters window, click the ACL tab.
2. Select the row that includes the ACE that you wish to modify.
3. Click Modify to open the ACL configuration box.
4. From the Templates for filter section, select the ACE and move it back to
the Pools of all templates section.
5. Click Ok to commit the changes or click Cancel to exit.
6. Click the ACE tab.
7. Select the row that includes the ACE that you want to change. Click
Modify. The Modifying RIP Export Template window appears.
8. Update the information as necessary.
9. Click OK to commit the changes or select Cancel to exit without saving.
EGP Route learned through the External Gateway Protocol. The
Cuda 12000 does not support EGP, in this release.
BGP_EXT Route learned through an external BGP router.The Cuda
12000 does not support BGP, in this release.
BGP_INT The Cuda 12000 does not support BGP internal router, in this
release.
Action Action that you want the system to take when matching
outgoing RIP routes. The options are:
Export Announce the route to be distributed.
Block Block the route from being distributed.
Override
Metric Value overrides the metric value from the routing database
entry for this route. Acceptable values are 0-16.
Action Tag Overrides the tag value from the routing database entry for
this route. Acceptable values are listed in the tooltip.
Parameter Description