Technical information

ADC Telecommunications, Inc.
382 C
HAPTER 13: CREATING ROUTE FILTERS
Parameter Descriptions
This table provides a description of the Adding RIP Export Template window
parameters.
Parameter Description
Description Textual description to identify the ACE. The range is 0 to 64
alpha-numeric characters.
Match Enter values for the match criteria. Any field left blank or set
to zero is treated as “don’t care”.
Tag Match routes on this route tag against routes within the
routing database. Choose one of the following two criteria to
tag a route:
Exact — If the Tag field is specified, then enabling Exact
indicates that the match is intended to match all routes with
an exact match on the tag field.
Exclude — If the Tag field is specified, then enabling Exclude
indicates that the match is intended to match all routes that
do not match on the tag field.
Route
Address
Route Address key to match against routes in the routing
database.
Route Mask Network mask to match against masks for routes in the
routing database.
Interface
Address
Interface to match against routes in the routing database.
Peer Range
Addr
Peer IP address to match against peer routers.
Peer Range
Mask
Network mask for the peer routers to match against peer
routers.
Specific A RIP-specific protocol field. Enter the next hop IP address.
Owner Select the owner of the route. The options are:
NONE Indicates that the route is not being used as part of the match
criteria.
LOCAL Route for a directly attached network
REMOTE Static route for a remotely attached network.
SPECIAL Default route.
OSPF Route learned through OSPF.
OSPF_EXT Route learned through OSPF and imported from an external
area from a source other than OSPF such as RIP.