Technical information

ADC Telecommunications, Inc.
380 C
HAPTER 13: CREATING ROUTE FILTERS
Configuring RIP and OSPF Export ACEs
Export ACEs control which routes are advertised to other routers.
RIP and OSPF use route filtering to control the flow of routes to and from
routing tables. You use route filtering to increase security, conserve routing
table space, or adjust route cost.
Before You Begin
Before you begin to create export ACEs, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Routing.
2. You can configure RIP route filters or OSPF route filters:
a To configure the RIP route filters, click the RIP Global tab.
b To configure the OSPF route filters, click the OSPF Global tab.
3. Click the Export Filters tab.
4. Click the ACE tab.
What You See
This figure shows an example of the ACE Export Filters window.
Creating RIP Export Filter ACEs
You can create and add RIP Export ACEs to create ACLs to control the
advertisement of RIP routes.
Default RIP Export filter ACEs 1, 2, and 3 should not be deleted and replaced
with user-defined ACEs. After a power up or reboot, the ACE configuration