Technical information

ADC Telecommunications, Inc.
378 C
HAPTER 13: CREATING ROUTE FILTERS
c From the Templates for filter section, select an ACE. Using the Up and
Down buttons, click Up to move an ACE up one level or click Down to
move an ACE down one level.
6. Click Ok to commit the modifications or click Cancel to exit without
saving.
What You See
Figure 13-9 MODIFY Template List for Filter Window
Activating RIP and OSPF Import Filter ACLs
An ACL must be active for the Cuda 12000 to recognize it during the match
process. You can only activate one ACL at a time and activating an ACL
automatically deactivates an existing active ACL.
To activate or de-activate an ACL, follow this procedure:
1. In the Import Filters window, click the ACL tab.
2. Select the RIP or OSPF ACL ID that you want to Activate or Deactivate.
3. Right-click anywhere in the bottom-half of the window and choose
Activate or Deactivate.