Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Import ACLs 375
■ Active filter: None — Indicates that there are no active filters.
3. Select the ACL ID number that you want to activate, right-click anywhere
in the bottom-half of the window and choose Activate or Deactivate.
Creating RIP and OSPF Import Filter ACLs
To create RIP and OSPF Import Filter ACLs, follow this procedure:
1. In the Import Filters window, click the ACE tab to view an ACE before you
add an ACL.
2. Click the ACL tab.
3. Click Add. The Add template list for filter window appears (Figure 13-6,
“Add RIP/OSF Import Filter Window”).
4. From the Pool of all templates section, select an ACE for the ACL that you
wish to use for the ACL.
5. Using the “>>” toggle button, move the ACE to the Templates for filter
section. You may choose more than one ACE for an ACL.
6. If you want to change the filtering order within the ACL, from the
Templates for filter section, select the ACE and click Up to move the ACE
up one level, or click Down to move the ACE down one level.
7. After you complete configuration, click OK to commit the information or
click Cancel to exit without saving.