Technical information

ADC Telecommunications, Inc.
374 C
HAPTER 13: CREATING ROUTE FILTERS
■ From the Templates for filter: To remove an ACE from an ACL and
move it back to the ACE pool, select the ACE and click on the
“<<“button.
Viewing ACE Settings
You may want to view the ACE settings before using it for an ACL. To view
the ACE settings, follow this procedure:
1. In the Import Filters window, click the ACL tab.
2. Select the ACE from the pool that you wish to view.
3. Click Details. A read-only view of that ACE appears.
Sorting ACEs within the ACL
ACEs within the ACL must be sorted, in order of the specific-to-general
match criteria and action for the ACL. To sort ACEs, follow this procedure:
1. In the Import Filters window, click the ACL tab.
2. Select the row that includes the ACE you wish to move from the
Templates for filter section.
3. Click Up to move the ACE up one level; click Down to move the ACE
down one level.
Determining ACL Status
Only one ACL can be Active at a time. Activating an ACL automatically
deactivates an existing Active ACL.
ACLs must be activated in order for the Cuda 12000 to recognize it
during the match process.
To determine the status of an ACL, follow this procedure:
1. In the Import Filters window, click the ACL tab.
2. View the bottom of the ACL Filters column. The status of the ACL is
appears below the Filters column.
■ Active filter: “N” — Indicates that the ACL numbered “N” is
activated.