Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Import ACLs 373
Figure 13-6 Add RIP/OSF Import Filter Window
Understanding ACL Configuration Windows
When you navigate to the ACL windows in the Import and Export ACL tabs,
you will see the configuration windows are divided into two sections:
■ The left side — Pool of all templates — displays the available ACE pool
for creating Import ACLs.
■ The right side — Templates for filter — displays the ACEs that are
chosen to be used for an ACL. The display is blank when the add box
is opened. The ACEs are listed in the section after they are added.
To maneuver between the Pool of all templates and the Templates for filter
sections follow this procedure:
■ From the Pool of all templates: To move an ACE from the pool and
add it for an ACL, select the ACE that you want to move and click on
the “>>” button.