Technical information

ADC Telecommunications, Inc.
372 C
HAPTER 13: CREATING ROUTE FILTERS
Configuring Import ACLs
An Access Control List (ACL) is a sequential grouping of ACEs that contain
the filtering criteria. Before configuring an ACL, you should have configured
the ACE’s that the ACL will contain .
Before You Begin
Before you begin to create route filters, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Routing.
2. You can configure RIP route filters or OSPF route filters:
a To configure the RIP route filters, click the RIP Global tab.
b To configure the OSPF route filters, click the OSPF Global tab.
3. Click the Import Filters tab.
What You See
This figure is an example of an OSPF Import ACL Add window. This example
shows that the new ACL ID # is “1,” and that there are two ACEs available
to be used for an ACL.