Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Import ACEs 369
What You See
Figure 13-5 Add OSPF Import ACE window.
Parameter Descriptions
This table provides a description of the Adding OSPF Import Template
window parameters.
Parameter Description
Description Textual description to identify the ACE. The range is 0 to 64
alpha-numeric characters.
Match Enter values for the match criteria. Any field left blank or set
to zero is treated as “don’t care”.
Tag Route tag to match against the value placed in the route tag
field of the OSPF packet by the sending router. Choose one
of these two criteria to tag a route:
Exact — If the Tag field is specified, then enabling Exact
indicates that the match is intended to match all routes with
an exact match on the tag field.
Exclude — If the Tag field is specified, then enabling Exclude
indicates that the match is intended to match all routes that
do not match on the tag field.
Route
Address
Route Address key of the template.
Route Mask Route Mask key of the template.
Peer Range
Addr
Peer IP address to match against incoming packets.