Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Import ACEs 367
Modifying RIP Import ACEs
Modifying a RIP Import ACE involves removing the ACE as an ACL within the
ACL configuration window, and changing the match criteria.
1. In the Import Filters window, click the ACL tab. The ACL window appears
and provides the ACE for each ACL.
2. Select the row that includes the ACE you wish to modify. Click Modify
[See Add RIP Imports Templates Window].
3. From the Templates for filter section, select the ACE and using the
arrows, move it back to the Pools of all templates section.
4. Click Ok to commit or click Cancel to exit.
5. Click the ACE tab.
6. Select the row that includes the ACE that you wish to modify. Click
Modify.
7. Modify parameters as necessary.
8. Click Ok to commit or click Cancel to exit.
What You See
Figure 13-4 RIP/OSPF Import Filters ACL Window
Deleting RIP Import ACEs
Deleting a RIP Import ACE involves removing the ACE from an ACL within
the ACL configuration window, and deleting it as an ACE within the ACE
configuration window.
Before you delete an ACE, you must first remove it from each ACL of which
that ACE is a member.