Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Import ACEs 363
Configuring Import ACEs
An Access Control Element (ACE) is a structure used as a specification to
match an incoming or outgoing route.
Before You Begin
Before you begin to create route filters, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Routing.
2. You can configure RIP route filters or OSPF route filters:
a To configure the RIP route filters, click the RIP Global tab.
b To configure the OSPF route filters, click the OSPF Global tab.
3. Click the Import Filters tab.
Creating RIP Import ACEs
This section describes how to create and add RIP Import ACEs that may be
used to create ACLs. To create RIP Import ACEs follow this procedure:
1. In the Import Filters window, click the ACE tab. The ACE window
appears and provides the existing ACEs that are available to be used for
creating ACLs.
2. Click Add. The Adding RIP Import Template window appears.
3. Add values for the parameters.
4. Click OK to commit the information or click Cancel to exit without
saving.