Technical information

ADC Telecommunications, Inc.
358 C
HAPTER 12: CONFIGURING IP ROUTING
Deleting a Static Route
To delete a static route from the routing table, follow this procedure:
1. In the Static Route window, click Delete. A confirmation window
appears.
2. Click Yes to continue or click Cancel.
Reject. This directs the Cuda 12000 to discard any packets
destined to the specified destination network.
Local. Configure a static route to a local destination via a
specified interface.
Remote. Configure a static route to a remote destination via
a specified IP gateway.
Default. Configure the default route for this router.
Chassis/Slot/Inte
rface
Chassis/slot/interface that to which you are adding a static
route.
Gateway The next hop IP address. This is configured for only Remote
routes.
Destination IP address of the Destination network.
Network Mask Network Mask assigned to this static route.
Metric Assign a metric to this static route.
Parameter Description