Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring Static Routes 357
Adding a Static Route
To add a Static Route, follow this procedure:
1. In the Static Route window, click Add. The Add Static Route window
appears.
2. Enter values for the parameters. Refer to Table 12-23.
3. Click Ok to commit the information or click Cancel to exit without
adding the route.
What You See
Figure 12-29 Add Static Route Window
Parameter Descriptions
This table provides a description of the Add Static Route window
Table 12-23 Add Static Route Window Parameters.
Parameter Description
Route Type The options are: