Technical information

ADC Telecommunications, Inc.
356 C
HAPTER 12: CONFIGURING IP ROUTING
Configuring Static Routes
You can manually add routes in the Cuda 12000 routing table. These routes
are called static because they do not change in response to network
topology changes and remain in the table until you manually remove them.
They assist the dynamic routes in managing the exchange of data between
routers.
Static routes are useful in network environments in which:
■ No routing protocol is used, or
■ You want to override select routes discovered using a routing protocol.
Before You Begin
Before you begin, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Routing.
2. Click the Static Routes tab. The Static Routes window appears.
What You See
Figure 12-28 Static Routes Window