Technical information

ADC Telecommunications, Inc.
352 C
HAPTER 12: CONFIGURING IP ROUTING
What You See
Figure 12-25 OSPF Neighbors Window
Parameter Descriptions
This table provides a description of the Neighbors window
Table 12-20 Virtual Interfaces Neighbors Window Parameters
Parameter Description
Transit Area ID The Transit Area that the Virtual Link traverses. By definition,
this is not 0.0.0.0.
Neighbor Router
ID
A 32-bit integer uniquely identifying the neighboring router
in the Autonomous System.
IP Address IP address used by the virtual neighbor.
Options A Bit Mask corresponding to the neighbor's options field. Bit
1, if set, indicates that the system will operate on Type of
Service metrics other than TOS 0. If zero, the neighbor will
ignore all metrics except the TOS 0 metric. Bit 2, if set,
indicates that the system is Network Multicast capable; that
is, it implements OSPF Multicast Routing.
State The state of the Virtual Neighbor Relationship: Values are
:down (1), attempt (2), init (3), twoWay (4), exchangeStart
(5), exchange (6), loading (7), full (8).
Event The number of times this virtual link has changed its state, or
an error has occurred.
Retransmit Q.
Len.
The current length of the retransmission queue.
Hello
Suppression
Indicates whether Hellos are being suppressed to the
neighbor.