Technical information

ADC Telecommunications, Inc.
342 C
HAPTER 12: CONFIGURING IP ROUTING
Adding OSPF Parameters
Follow these steps to configure OSPF Parameters on an IP Interface:
1. In the OSPF Parameters window, click Add. The Add OSPF Interface
window appears.
2. Enter values for the parameters. Selecting the Timers parameters
activates the parameters in the right column. Refer to Table 12-16.
3. Click OK to commit the information or click Cancel to exit without
saving.
Interface The module configured on the Cuda 12000.
IP Address IP Address assigned to the Interface.
OSPF Interface
Type
Corresponds to the physical Interface.
OSPF State Displays state of OSPF. The states are Down and Designated
Router.
OSPF Status Indicates if OSPF is Enabled or Disabled for the Interface.
OSPF Area Indicates the Area ID associated with OSPF for the Interface
Designated Rtr Generates link state advertisement to routers in the same
area and has several responsibilities for running the protocol.
Elected by the Hello protocol. Its IP address is displayed.
Backup Rtr The IP address of the backup designated router is displayed.
Authentication
This module defines a way Traceroute is used in the Cuda
system.
Parameter Description