Technical information

ADC Telecommunications, Inc.
340 C
HAPTER 12: CONFIGURING IP ROUTING
Configuring OSPF Interfaces
The purpose of configuring OSPF on an interface is to provide the Cuda
12000 with the ability to exchange OSPF routes over an IP interface.
Configuration involves these functions:
■ Adding OSPF Parameters.
■ Viewing OSPF Neighbors
■ Modifying the OSPF Interface within the OSPF Area.
■ Deleting an OSPF interface.
Before You Begin
Before you configure the OSPF interfaces, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Routing.
2. Click the OSPF Global tab.
3. Click the OSPF Interfaces tab.
4. Click the OSPF Parameters tab. The OSPF Parameter window appears
and provides a list of interfaces and IP Addresses, either configured or not
configured with OSPF. Refer to the OSPF Interfaces Parameters table for
more information.