Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring OSPF Global 329
Configuring OSPF Global
OSPF (Open Shortest Path First) is a link-state routing protocol. The Cuda
12000 supports OSPF version 2 as defined in RFC 1583. Configuring OSPF
involves these functions.
■ Configuring OSPF Global Parameters
■ Viewing OSPF Areas
■ Defining OSPF Areas
■ Modifying OSPF Areas
■ Deleting an OSPF Area Parameter
■ Defining OSPF Area Ranges
All OSPF protocol exchanges are authenticated.This means that only trusted
routers can participate in routing within an autonomous system.
Refer to Chapter 13, “Creating Route Filters” for an explanation of how to
configure OSPF Import and Export Filters.
Before You Begin
Before you configure the RIP interfaces, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > IP Routing.
2. Click the OSPF Global tab. The OSPF Global window appears.
Configuring OSPF Global Parameters
OSPF Global Parameters provide network information about OSPF. To
configure the global parameters, follow this procedure:
1. In the OSPF Global window, click the Global Parameters tab. The
Global Parameters window appears.
2. Enter values for the parameters. Refer to Table 12-11.
3. Click Apply to commit the information or click Reset to return to the
previous values.