Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Configuring RIP Global 321
Send Version
What the router sends on this interface.Multiple Send
versions. Version1 implies sending RIP updates compliant
with RFC 1058. ripSendVer2 implies multicasting RIP-2
updates.
NOTE: You must indicate RIPv2 in order to authenticate.
Receive Version This indicates which version of RIP updates is to be accepted.
Note that ripRcvVer2 and ripRcvVer1and2 implies reception
of multicast packets
Cost Value of metric corresponding to this interface. Metric value
is added to all routes learned from this interface.
Send Default If TRUE, RIP update from this interface include the default
route.
Default Cost This variable indicates the metric to be used for the default
route entry in RIP updates originated on this interface.
Authentication
Type
Type of authentication used on the interface. The options are
no authentication, MD5 or simple password.
Authentication
Key ID
The md5 authentication key id used for this interface.
RFC2082 describes md5 authentication and key ids. A range
of 1 to 255 is allowed.
Authentication
Key
The value to be used as the Authentication Key whenever
the corresponding instance of Authentication Type has a
value other than no Authentication. A modification of the
corresponding instance of Auth.Type does not modify the
Auth. Key value. If a string shorter than 16 octets is supplied,
it is left- justified and padded to 16 octets, on the right, with
nulls (0x00). Reading this object always results in an OCTET
string of length zero; authentication may not be bypassed by
reading the MIB object.
Authentication
Key Again
TRUE enables authentication on this interface. All updates
generated from this interface are authenticated based on
authentication type.
Accept Host
Route
If FALSE, then host routes are NOT accepted on this interface
Accept Default
Route
If TRUE, then default routes are accepted on this interface.
Enable Split
Horizon
If TRUE, this enables split horizon processing as defined in
RFC 2354.
Parameter Description