Technical information
ADC Telecommunications, Inc.
312 C
HAPTER 12: CONFIGURING IP ROUTING
Adding an ARP Map Entry
To add an ARP Map entry, follow this procedure.
1. In the IP Configuration window, select the row that includes the
interface on which you want to add an IP source route.
2. Click the ARP tab.
3. Select the chassis, slot, and interface that you wish to access.
4. Click Add. The Add Static ARP Entry window opens as shown in the next
figure.
Figure 12-7 Add Static ARP Entry Window
.
5. Enter the IP and MAC addresses that you wish to use for the mapping.
6. Click OK to commit the information or click Cancel to exit without
saving.
7. Click Apply to commit the changes.